Filter
Top Products
4-34
E
EMU01635
CHECKING TOP COWLING
Check the fitting of the top cowling by push-
ing it with both hands.
If the fitting is loose have it repaired by a
Yamaha dealer.
EMU00409
MOTOR EXTERIOR
EMU00410
Cleaning the Outboard Motor
After use, wash the exterior of the outboard
with fresh water.
Flush the cooling system with fresh water.
NOTE:
@
Refer to Flushing Cooling System instruc-
tions in “TRANSPORTING AND STORING
OUTBOARD MOTOR”.
@
EMU00412
Checking Painted Surface of Motor
Check the motor for scratches, nicks, or flak-
ing paint. Areas with damaged paint are
more likely to corrode. If necessary, clean
and paint the areas. A touch-up paint is
available from a Yamaha dealer.
EMU00413
COATING THE BOAT BOTTOM
A clean hull improves boat performance.
The boat bottom should be kept as clean of
marine growths as possible. If necessary,
the boat bottom can be coated with an anti-
fouling paint approved for your area to inhibit
marine growth.
Do not use anti-fouling paint which includes
copper or graphite. These paints can cause
more rapid engine corrosion.
E_69J10.book Page 34 Monday, May 28, 2001 9:52 AM