Yamaha LF225A Outboard Motor User Manual


 
4-12
E
The mark (
) indicates work to be carried out by your Yamaha dealer.
*3. Be sure to replace the timing belt after every 1,000 hours (5 years) of operation.
*4. Do not retighten the cylinder head and crankcase bolts.
Item
Interval Initial Every
Refer
page
Remarks
10 hours
(after
break-in)
50 hours
(3 months)
100
hours
(6 months)
200
hours
(1 year)
400
hours
(2 years)
Ignition timing Inspection
Oil filter Change
Fuel filter
(Disposable type)
Inspection/Replacement
❍❍
Oil pump Inspection
Timing chain Inspection/Replacement
(1,000 hours or 5 years)
Chain tensioner Inspection/Replacement
Timing belt *3 Inspection/Replacement
Valve clearance Inspection/Adjustment
Thermostat Inspection
PCV
(Pressure Control Valve)
Inspection
Oil leakage Inspection/Replacement
❍❍❍
4-23
Flywheel nut Inspection
4-32
Throttle link Inspection/Adjustment
Throttle cable Inspection/Adjustment
Shift cable Inspection/Adjustment
Idling speed Inspection/Adjustment
❍❍
Impeller/Woodruff key Inspection/Replacement
(500 hours or 30 months)
Oil seal Inspection/Replacement
Power trim and tilt unit Inspection
4-24
Anodes/Trim tab Inspection/Replacement
4-28
Battery Inspection/Charge
4-29
Wiring & connectors Adjustment/Connection
❍❍
4-23
Bolts & nuts *4 Retightening
❍❍
4-32
E_69J10.book Page 12 Monday, May 28, 2001 9:52 AM