set accounting {dot1x | mac | web} 187
Defaults — Accounting is disabled for all users by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — For network users with start-stop accounting whose records
are sent to a RADIUS server, MSS sends interim updates to the RADIUS
server when the user roams.
Examples — The following command issues start-and-stop accounting
records at the local WX database for administrator Natasha, when she
accesses the switch using Telnet or Web Manager:
WX4400# set accounting admin Natasha start-stop local
success: change accepted.
See Also
■ “clear accounting” on page 165
■ “display accounting statistics” on page 182
set accounting
{dot1x | mac | web}
Sets up accounting services for specified wireless users with network
access, and defines the accounting records and where they are sent.
Syntax —
set accounting {dot1x | mac | web} {ssid ssid-name |
wired} {user-glob | mac-addr-glob} {start-stop | stop-only}
method1 [method2] [method3] [method4]
■ dot1x — Users with network access through the WX switch who are
authenticated by 802.1X.
■ mac — Users with network access through the WX switch who are
authenticated by MAC authentication
■ web — Users with network access through the WX switch who are
authenticated by Web AAA
■ ssid ssid-name — SSID name to which this accounting rule applies.
To apply the rule to all SSIDs, type any.
■ wired — Applies this accounting rule specifically to users who are
authenticated on a wired authentication port.
■ user-glob — Single user or set of users with administrative access or
network access.
