set system contact 51
set system contact Stores a contact name for the WX switch.
Syntax —
set system contact string
■ string — Alphanumeric string up to 256 characters long, with no
blank spaces.
Default — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
To view the system contact string, type the display system command.
Examples — The following command sets the system contact
information to tamara@example.com:
WX1200# set system contact tamara@example.com
success: change accepted.
See Also
■ “clear system” on page 39
■ “display system” on page 42
■ “set system location” on page 54
■ “set system name” on page 55
set system
countrycode
Defines the country-specific IEEE 802.11 regulations to enforce on the
WX switch.
Syntax —
set system countrycode code
■ code — Two-letter code for the country of operation for the WX
switch. You can specify one of the codes listed in Table 8.
Table 8 Country Codes
Country Code
Australia AU
Austria AT
