416 CHAPTER 15: 802.1X MANAGEMENT COMMANDS
clear dot1x
bonded-period
Disables Bonded Auth™ (bonded authentication). The bonded period is
the number of seconds MSS retains session information for an
authenticated machine while waiting for an 802.1X client on the
machine to start (re)authentication for the user. When bonded
authentication is enabled, it applies only to an 802.1X user whose
authentication rule on the WX switch contains the bonded option.
Syntax —
clear dot1x bonded-period
Defaults — The default bonded authentication period is 0 seconds,
which disables the feature.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To disable bonded authentication, type the following
command:
WX4400# clear dot1x bonded-period
success: change accepted.
Reauthentication, cont. “clear dot1x reauth-max” on page 418
“set dot1x reauth-period” on page 430
“clear dot1x reauth-period” on page 419
Retransmission “set dot1x max-req” on page 427
“clear dot1x max-req” on page 417
Quiet Period and Timeouts “set dot1x quiet-period” on page 429
“clear dot1x quiet-period” on page 418
“set dot1x timeout auth-server” on page 431
“clear dot1x timeout auth-server” on page 419
“set dot1x timeout supplicant” on page 431
“clear dot1x timeout supplicant” on page 420
Settings, Active Clients, and
Statistics
“display dot1x” on page 421
Table 76 802.1X Commands by Usage (continued)
Type Command
