Cuda 12000 IP Access Switch CLI-based Administration Guide
Chassis Commands 583
http-server {enable | disable} root Enables and disables the HTTP
server on the chassis.
lookup {enable | disable} root Enables the Jini lookup service on
the chassis, which is required for
chassis group support.
reset [{hard | soft}] slot c/s Resets (reboots) the module that is
installed in the selected slot.
save slot Persists the configuration of a
module in the current slot, or in all
chassis slots.
traffic-relay {dns | ftp | http | snmp |
snmp-trap | ssh | syslog | telnet | tftp |
time_of_day} [port <port>]
root Configures processes, such as the
HTTP server, to send and receive
TCP or UDP packets using an
internal address on the chassis.
Command Mode Description
