16
17
SPECIFICATIONS
TRAILER
The engine-generator set is housed in a bunded two wheel trailer fabricated from heavy
gauge steel. The design enables the trailer to contain the outriggers in a simple, com-
pact position.
MAST
When the mast is in the operating position it is located in the middle of a three point
outrigger system for optimum balance and stability.
The mast consists of seven fabricated steel sections that telescope to 25 ft and UHMW
plastic guide pads to provide smooth operation and reduced friction.
The mast sections are extended with either a manual or electric winch, or hydaulic
pump. The electric winch design includes limit switches that turn the winch off when the
mast reaches full extension or is fully retracted.
STABILIZERS
The three point outrigger design consists of two retractable side outriggers and a tongue
jack.
FLOOD LIGHT ASSEMBLY
The ood light assembly consists of four 1250 watt lamp xtures sealed for all weather
use.
TOWING INSTRUCTIONS
Before towing the Night-Lite Pro the trailer should be inspected visually to insure that the
following operations have been completed:
1. Hitch is securely attached to the towing vehicle
2. All outriggers and jacks are retracted and secured.
3. Light xtures are positioned for transport.
4. Doors are closed and secure.
5. Check for adequate tire pressure.
6. Tail lights are connected and operational.
7. Ground rod is removed from ground and secured in trailer.
SHO 1250 xture - Metal Halide Lamp
Lumen rating: 150,000 initial lumens
Warm up time: 2-4 minutes
Restart time: 10-15 minutes
