18
19
FOR A WARM ENGINE (Kubota, CAT, and Lombardini engines)
Follow the same procedure as described for cold weather starting, skipping step 1 (step 2 for Kubota).
Use of the glow plugs is not recommended when engine is warm.
LOW OIL PRESSURE SHUT-OFF SYSTEM
Should a low oil pressure condition occur, the oil pressure sending unit breaks the circuit between the battery
and the fuel solenoid, allowing the spring load to immediately move the fuel control to the shut-off position.
HIGH COOLANT TEMPERATURE SHUT-OFF SYSTEM
Should a high coolant temperature condition occur, the temperature sending unit breaks the circuit between
the battery and the fuel solenoid, allowing the spring load to immediately move the fuel control to the shut-off
position.
STOPPING THE ENGINE
To stop the engine turn the ignition switch to the off position, this breaks the circuit between the battery and
the fuel solenoid, allowing the spring load to immediately move the control to the shut-off position
STARTING INSTRUCTIONS and SERIAL NUMBER LOCATIONS
TRAILER SERIAL NUMBER LOCATION
SERIAL NUMBER LOCATION
Trailer: All NIGHT-LITE PRO series trailers have a serial number plate attached to the
rear tower support below the tower lock. (See illustration)
