A SERVICE OF

logo

INSTALLATION MANUAL • 15.
INSTALLATION
OPTIONAL HAND HELD SPRAY HOSE
Valve bracket
INSTALLATION
1 Using the valve bracket as a template for placement, and a #28
drill bit (0.14" diameter), drill two holes at the lower rear side
of the unit (same side as door opening). Fasten the valve bracket
using the 2 self drilling screws.
2 Using the sprayer hanger as a template for placement, and a #28
drill bit (0.14" diameter), drill three holes at the upper front side of
unit (same side as door opening). Fasten the sprayer hanger using the 3
self drilling screws.
3 Connect the sprayer hose to the valve and place the sprayer in the hanger.
4 Continue to connect an incoming water supply line to the valve.
Sprayer hanger
Sprayer hose
Valve