INSTALLATION MANUAL • 23.
ERROR CODES
Error
Code
Error Call Out in Display Description of Error Possible Cause
E57
No Rinse Water During rinse no water
solenoid valve
— Low water pressure.
E93
between display board and
low voltage relay board
— Ribbon cable defective.
— Relay board, low voltage, connector defective.
— Display board connector defective.
E94
TO Display Board
between display board and
low voltage relay board
— Ribbon cable defective.
— Relay board, low voltage, connector defective.
— Display board connector defective.
E98
E99
E100
DB is not equal to RB
by DB.
failed.
— Ribbon cable defective.
— Relay board, low voltage, connector defective.
— Display board connector defective.
— Software may need to be updated again.
E101
DB is not equal to RB
by RB.
failed.
— Ribbon cable defective.
— Relay board, low voltage, connector defective.
— Display board connector defective.
— Software may need to be updated again.
CONTROL ERROR CODES
