A SERVICE OF

logo

Open as PDF
next previous
3.
Pull the socket
out
of the lamp
assembly.
4.
Push
in
gently on
the bulb, turn
it
to
the left and
remove it from
the socket.
5.
Put the new bulb
in
the socket, gently press
in
on
the bulb and
turn
it
to
6.
Put
the
socket back into the lamp assembly and turn it socket
to
the
the right
until
it
is
tight.
right until
it
locks.
7.
Put the parkinghrn signal lamp assembly back
into
the
vehicle and
tighten the screws.
Side Marker Lamps with Sealed Beam and
Composite
Headlamps
1.
Remove the
screws and pull
out the
parkinghurn
signal lamp
assembly.
2.
Reach through
the opening and
turn the side
marker bulb
socket
to
the left
and remove
it.
6-SO