Maintenance Schedule
I
-
Gasoline Engines With
Light Duty
Emissions
(Continued)
0
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
**
27,000
Miles
(45
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature
is
10"
F
(-12" C), or higher. When weather
is
cold, let
the
ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of
the listed lubrication service items at this mileage
interval (or every
6
months, whichever occurs first).
first).
An
Emission
Control
Service.
0
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals
for
leaking.**
DATE
SERVICED
BY:
ACTUAL MILEAGE
7-1
8
