Maintenance Schedule
I
-
Gasoline Engines Heavy
Duty Emissions
(Continued)
0
Check readfront axle fluid level and add fluid
as
needed. Check
constant velocity joints and axle seals for leaking.**
0
Rotate tires. See “Tire Inspection and Rotation”
in
the Index for proper
rotation pattern and additional information.
DATE
SERVICED
BY
ACTUAL
MILEAGE
45,000
Miles
(75
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
first).
An
Emission
Control
Service.
0
Lubricate
the
front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should
not
be lubricated unless their temperature
is
10”
F
(-12”
C),
or higher. When weather
is
cold,
let
the ball joints and king
pin bushings warm up before lubrication or
they
could be damaged.
Perform each of the listed lubrication service items
at
this
mileage
interval (or every
12
months, whichever occurs first).
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.**
DATE SERVICED
BY:
ACTUAL
MILEAGE
