D-Link DES-3010FA/GA User Guide
Page 130
Defining DNS Servers
The DNS Server Page contains fields for enabling and activating specific DNS servers. To enable a DNS server:
1. Click Basic Setup > IP Configuration > Domain Name System > DNS Server. The DNS Server Page
opens:
Figure 78: DNS Server Page
The DNS Server Page contains the following fields:
• Enable DNS — Enables translating the DNS names into IP addresses. The possible field values are:
– Enable — Translates the domains into IP addresses.
– Disable — Disables translating domains into IP addresses.
• Default Domain Name — Specifies the user-defined DNS server name.
• Type — Displays the IP address type. The possible field values are:
– Dynamic — The IP address is dynamically created.
– Static — The IP address is a static IP address.
• Remove — Removes DNS servers. The possible field values are:
– Checked — Removes the selected DNS server
– Unchecked — Maintains the current DNS server list.
• DNS Server — Displays the DNS server D-Link IP address. DNS servers are added in the Add DNS Server
Page.
• Active Server— Specifies the DNS server that is currently active.
