DGS-3224TGR Gigabit Ethernet Switch User’s Guide
34
Subnet Mask
The address mask that controls subnetting on your TCP/IP network.
Default Gateway
The IP address of the device—usually a router—that handles connections to other
subnets and/or other TCP/IP networks.
VLAN Name
The VLAN name. The switch includes a pre-configured VLAN named “default.”
Name
A user-assigned name for the switch.
Location
A user-assigned description for the physical location of the switch.
Contact
Name of the person to contact should there be any problems or questions with the
system. You may also want to include a phone number or extension.
State
This allows you to enable or disable the IP interface.
Serial Port Settings
Figure 6- 3. Serial Port Settings window
The following fields can be set:
Parameter Description
Baud Rate
Determines the serial port bit rate that will be used the next time the switch is restarted.
Available speeds are 9600, 19,200, 38,400, and 115,200 bits per second. The default
setting is 9600.
Auto Logout
This setting for the restart of the console is 2 mins, 5 mins, 10 mins, 15 mins, or Never.
