DGS-3224TGR Gigabit Ethernet Switch User’s Guide
55
Parameter Description
Port
Select the port you want port error analysis statistics for from the drop-down menu.
Interval
Select the desired setting between 2 seconds and 60 second, or Suspend.
Clear
Clicking this button clears all statistics counters on this window.
64
The total number of packets (including bad packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
65-127
The total number of packets (including bad packets) received that were between 65 and
127 octets in length inclusive (excluding framing bits but including FCS octets).
128-255
The total number of packets (including bad packets) received that were between 128 and
255 octets in length inclusive (excluding framing bits but including FCS octets).
256-511
The total number of packets (including bad packets) received that were between 256 and
511 octets in length inclusive (excluding framing bits but including FCS octets).
512-1023
The total number of packets (including bad packets) received that were between 512 and
1023 octets in length inclusive (excluding framing bits but including FCS octets).
1024-1518
The total number of packets (including bad packets) received that were between 1024 and
1518 octets in length inclusive (excluding framing bits but including FCS octets).
Unicast RX
Displays the number of unicast packets received by the switch in total number (Frames)
and the rate (Frames/sec).
Multicast RX
Displays the number of multicast packets received by the switch in total number (Frames)
and the rate (Frames/sec).
Broadcast RX
Displays the number of broadcast packets received by the switch in total number
(Frames) and the rate (Frames/sec).
RX Bytes
Displays the number of bytes (octets) received by the switch in total number (Total), and
rate (Total/sec).
RX Frames
Displays the number of packets (frames) received by the switch in total number (Total),
and rate (Total/sec).
TX Bytes
Displays the number of bytes (octets) transmitted by the switch in total number (Total),
and rate (Total/sec).
Address Tables
The Address Tables include the MAC Address Table and ARP Table.
