Fluke 433/434
Getting Started
16
Setting up the Analyzer
SETUP
The SETUP key gives access to a menu to configure the
Analyzer for your measurements.
Use the arrow keys to select the item
you want to adjust: date, time, wiring
configuration, nominal frequency,
nominal voltage, limits, current and
voltage probe type.
User ID is adjusted under F4 USER ID.
ENTER
Press ENTER to reach the selected
adjustment menu.
Use the arrow keys to select and adjust
the selected item.
F5
Press F5 to confirm the selection and to
return to the SETUP menu.
Note: Limits gives access to submenus to recall,
customize, and save 6 sets of Power Quality criteria. For
detailed information refer to Chapter 18 in the Users
Manual on the accompanying CD-ROM.
Function keys give access to submenus to adjust:
