1
Getting Started
Introduction
This Getting Started manual provides basic information
on the Fluke 433 and 434 Three Phase Power Quality
Analyzers. Fluke 434 has additional features such as
Interharmonics, Transients, Energy Usage, Inrush
Currents, extra memory to store Screens and Data,
FlukeView software, and an optical isolated interface
cable.
For complete operating instructions, refer to the Users
Manual on the accompanying CD-ROM.
Contacting a Service Center
To locate a Fluke authorized service center, visit us on
the World Wide Web at: www.fluke.com or call Fluke
using any of the following phone numbers:
+1-888-993-5853 in the U.S. and Canada
+31-40-2675200 in Europe
+1-425-446-5500 from other countries.
Safety Information: Read First
The Fluke 433/434 Three Phase Power Quality Analyzer -
hereafter referred to as “Analyzer” - complies with:
• ANSI/ISA S82.01-1994.
• EN/IEC61010-1 2
nd
edition 1000 V Measurement
Category III, 600 V Measurement Cat IV, Pollution
Degree 2.
• CAN/CSA-C22.2 No.61010-1-04 (including
approval).
Use the Analyzer and its accessories only as specified in
the Users Manual. Otherwise, the protection provided by
the Analyzer and its accessories might be impaired.
A Warning identifies conditions and actions that pose
hazard(s) to the user.
A Caution identifies conditions and actions that may
damage the Analyzer.
