HandHeldItems.com 9500 Manual

A SERVICE OF

next previous

Dolphin® 9500 Series User’s Guide Rev A

5/15/07

2 - 5

Verify Decoding

The Scan Demo enables you to decode a sample bar code.

1. Tap Start > Demos > Scan Demo.

2. Aim the terminal at a bar code and press the SCAN key. The scan LED lights red and an aimer beam or bracket projects out

from the scanner.

(The format of the aimer depends on the image engine installed in the terminal; 5000 and 5100 image engines project a

green aimer beam and 5300 image engine projects an LED aiming bracket.)

3. When a good scan is obtained, the decode LED lights solid green and the terminal beeps. The bar code readout appears on

the screen.

4. Press the ESC key to close the demo.

Sample Bar Codes

You can use the following bar codes to verify decoding:

Note: The Dolphin 9551 supports only 1D symbologies; use Code 128 to verify scanning.

For more information, see Decoding on page 4-4.

Sample 128 Sample PDF417

Code 128 PDF417 Test Message