Dolphin® 9500 Series User’s Guide Rev A
5/15/07
6 - 11
IPSM—Short for Internal Persistent Storage Manager, this is the 14MB of on-board Flash memory
that is non-volatile. Because this memory is non-volatile, data or programs stored in IPSM are not
affected when power is removed. Autoinstall programs, for example, are stored in IPSM so that they
are always installed at cold-boot startup.
Storage Card—You can install one memory card in Dolphin terminals (see Access Door on page 3-
6). If a storage card is installed in the terminal, you can select it in the drop-down list and see capacity
and usage statistics for the card.
Running Programs Tab Displays the software programs currently using Storage memory.
Check this tab when you are receiving out of memory errors or when the mobile computer is running slowly. You can
• Select a program in the list and tap Stop to stop it from running (and therefore from using memory), or
•Tap Stop All to automatically stop all running programs.
Anytime you stop a running program, it frees up RAM memory. Be advised that, when you stop a program here, any unsaved
data in that program is lost. To free up memory without risking data loss, return to the running program, save your data, and close
the application.
Find Link
Underneath the three Memory tabs is a link to the Find window that enables you to search for
large files using storage memory.
Clicking this link opens the Search screen with Larger than 64KB already selected in the Type
field. To perform a search, enter the search criteria in the Find field and tap Search in the lower
left corner.
In use The MB currently being used.
Free The MB that is still available for use.
!
