A SERVICE OF

logo

Removal and replacement procedures 38
4.
Remove the front bezel ("Front bezel" on page 27).
5.
Remove the air baffle ("Air baffle" on page 31).
6.
Remove fan module 3 ("Fan module" on page 31).
7.
Remove the multibay backplane assembly ("Multibay backplane assembly" on page 35).
8.
Disconnect the Systems Insight Display cable.
9.
Remove the T-15 Torx screw that secures the Systems Insight Display.
10.
Remove the Systems Insight Display.
To replace the component, reverse the removal procedure.
PCI riser board assembly
To remove the component: