A SERVICE OF

logo

Open as PDF
next previous
Removal and replacement procedures 41
8.
Remove the full-length PCI Express riser board from the riser board assembly.
To replace the component, reverse the removal procedure.
Integrated HP Smart Array E200i Controller or HP
Smart Array P400i Controller
To remove the component:
1.
Power down the server (on page 25).
2.
Extend the server from the rack (on page 25).
3.
Remove the access panel ("Access panel" on page 30).
4.
Remove the air baffle ("Air baffle" on page 31).
5.
Disconnect all cables from the integrated array controller.