Configuring and Testing the Tape Library
L700 (CTL700) Installation and User’s Guide—527338-004
5-15
Installing Diagnostic and Cleaning Cartridges
Labeling Cartridges
Figure 5-2 shows the correct placement of labels for tape cartridges.
To apply the diagnostic and cleaning labels:
1. From the installation kit, obtain the cartridge label packages: STK PN 309952901
for CT9840-1/CT9840FC-1/CT9841FC-1 cleaning cartridges.
2. Attach a CLN label to all applicable cleaning cartridges.
3. Attach a DG 000 label to all applicable diagnostic cartridges.
Diagnostic and Cleaning Cartridge Cells
The following procedure applies to the Reserved Cells area (shown in Figure 5-3). This
area is reserved for cleaning and diagnostic cartridges for each tape drive type. The
reserved cells are located below CAP B (for tape libraries with two CAPs) or below the
front viewing window (for tape libraries with two CAPs), or below the front viewing
window (for tape libraries with only one CAP).
Figure 5-3. Reserved Cells
