A SERVICE OF

logo

Open as PDF
next previous
Server operations 23
After installing hardware options, install the access panel. Be sure that the panel
is locked into place securely before powering up the server.
Installing the access panel
CAUTION: Do not operate the server for long periods with the
access panel open or removed. Operating the server in this manner
results in improper airflow and improper cooling that can lead to thermal
damage.
1. Place the access panel on the chassis and slide it toward the front of the
server.
2. Tighten the two thumbscrews.
3. Close the bezel ("Unlocking the bezel" on page 22
).
IMPORTANT: Be sure that the panel is locked into place securely
before powering up the server.
4. Power up the server ("Powering up the server" on page 21).