A SERVICE OF

logo

40 HP ProLiant ML310 Generation 3 Server User Guide
Server model Drives supported Additional required
components
Non-hot-plug SCSI SCSI N/A
Hot-plug SCSI SCSI N/A
Hot-plug SATA/SAS SATA, SAS SAS controller required
for hot-plug SAS hard
drive
Non-hot-plug SCSI and SATA hard drives
1. Power down the server ("Powering down the server" on page 21).
2. Remove the bezel ("Unlocking the bezel" on page 22
).
3. Remove the access panel ("Removing the access panel" on page 22
).
4. Remove the drive cage from the front of the chassis.