A SERVICE OF

logo

Open as PDF
next previous
46 HP ProLiant ML310 Generation 3 Server User Guide
5. Install the SAS controller, and press it down to seat.
6. Disconnect the SAS cable from the system board and connect it to the SAS
controller ("SAS cabling" on page 58
).
DVD-ROM drive
CAUTION: To prevent improper cooling and thermal damage, do
not operate the server unless all bays are populated with either a
component or a blank.
1. Power down the server ("Powering down the server" on page 21).
2. Remove the bezel ("Unlocking the bezel" on page 22
).
3. Remove the access panel ("Removing the access panel" on page 22
).
4. Disconnect the cables from the rear of the CD-ROM drive.