A SERVICE OF

logo

Open as PDF
next previous
Removal and replacement procedures 39
3.
Remove the fan.
To replace the component, reverse the removal procedure.
Expansion slot cover
To remove the component:
1. Power down the server (on page 29).
2. Extend the server from the rack, if applicable ("Extend the server from the rack" on page 29).
3. Remove the access panel ("Access panel" on page 31).
4. Press the slot release lever and swing the slot release lever upward.
5. Remove the expansion slot cover.
Retain the slot cover for future use.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots
have either an expansion slot cover or an expansion board installed.