SwitchLinc V2 Dimmer 1000W User’s Guide
Mechanical
Paddle Type True rocker action
Paddle and Trim Frame Color White installed
Optional Ivory, Almond, Black, Brown, or Gray with #2400xx kits
Wire Nuts 4 included
Mounting Mounts in single or multiple-ganged junction box.
Controls 200 watts less load for each immediately adjacent electronic
dimmer installed. For example, 1000 watt load capacity becomes 800 watt
with another electronic dimmer installed to the immediate right or left. Use
a triple-gang box with a mechanical switch (or a non-dimming electronic
switch like SwitchLinc Relay) in the center, to avoid de-rating.
Heat Dissipation Four heat dissipation fins integrated into SwitchLinc Dimmer body. Individual fins
can be permanently detached from switch if fins interfere with installation.
Removal of each individual fin will reduce rated switch capacity by 100W.
Operating Conditions Indoors, 40 to 104°F, up to 85% relative humidity
Dimensions 4.1” H x 1.8” W x 1.2” D
Weight 3.6 oz
Electrical
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Power Wire Leads 6”, 16 AWG, stranded,
600V, 105°C insulation, ends stripped and tinned,
LINE (black), LOAD (red), NEUTRAL (white)
Ground Lead 6”, 18 AWG, stranded, bare copper
Load Types Wired-in incandescent lighting devices
Maximum Load 1000 Watts
Minimum Load No minimum load required
Certification Safety tested for use in USA and Canada (ETL #3017581)
Page 35 of 36
