A SERVICE OF

logo

13-22 BRAKES
Rear Brake Lever, Pedal and Cables
Remove:
Circlip [A]
Cotter Pin, Washer and Pin [B]
Brake Pedal Cable [C]
Brake Cable Installation
Grease the brake cable front ends.
Replace the cotter pin with a new one.
Route the brake cables according to the Cable, Wire, and
Hose Routing section in Appendix chapter.
Adjust the brake pedal and rear brake lever.
Brake C able Lubrication
Whenever the brake cable is removed, lubricate the cable
as follows:
Lubricate the cable with a penetrating rust inhibitor.