Operating Instructions
153
Enter a number in one-byte
character in "Port".
→ Follow the instruction message.
Failed to connect. • If a connection to the remote server cannot be
established.
→ Confirm that the remote server is properly
r un ni ng .
→ Confirm the new connection settings.
Access authentication can not be
do ne.
Confirm the user name and
password.
• If remote client access cannot be
authenticated at the remote server.
→ Confirm that the remote server is properly
running.
→ Follow the instruction message.
The server connection is closed.
Do you want to reconnect?
• Connection to the server was lost due to
network congestion (Remote client).
→ Follow the instruction message.
The number of connections has
exceeded the limit. Wait for a
moment and try again.
• A remote client has connected to the server
while you were trying to connect to the remote
server (Remote client).
→ Follow the instruction message.
Another administrator changed the
settings. Wait for a moment and try
again.
• Settings were applied while you were
configuring remote server settings (Remote
client).
→ Follow the instruction message.
The settings have been changed.
Information is being updated now.
Please wait.
• Settings were changed during remote access.
You will need to reload any modified
information (Remote client).
→ Follow the instruction message.
Another administrator changed the
settings. Restart the program.
• Settings were changed while loading ncr3.exe
on the remote server (Remote client).
→ Follow the instruction message.
Message Cause and Remedy
