Operating Instructions
112
10. Click [Go to Trigger page].
• The Trigger page is displayed.
Notes
• If you set a short interval to transfer image to a cell phone, many E-mails
may be sent to it leading to a large phone bill. Therefore, we recommend
you to set a long interval. 1 image per minute frequency is recommended.
• Motion Detection transfer stops its operations until this product finishes all
transfers. For example, if this product transfers 3 images per minute and
6 images in total, the Motion Detection will be in the following operation.
• If you are buffering images on the internal memory, the following
operations also delete all buffered images.
– Turning off this product.
– Saving the Date and Time page.
– Restarting, updating firmware or resetting this product to factory
default.
Detectable DetectableUndetectable
1st 2nd 3rd 4th 5th 6th
120 seconds
A Motion Detection signal is detected.
