A SERVICE OF

logo

Operating Instructions
[For assistance, please call: 1-800-272-7033] 121
2.25 Notifying Setup of an Alarm Log
Once a day, an alarm log sent at a specified time can be checked. To enable Alarm
Log, set Alarm or Motion Detection for Trigger Setting and check [Enable].
1. Click [Alarm Log] on the Setup page.
2. Set each parameter.
3. Click [Save] to save the settings.
Clicking [Cancel] cancels your settings without saving changes.
4. Click [Go to Alarm Log page].
The Alarm Log page is displayed.
Note
If you change a setup of operation and click [Save], new alarm logs are
deleted.