A SERVICE OF

logo

Open as PDF
next previous
Operating Instructions
78
Access Control
Access Control window allows you to control the access to the Camera Portal page
from the WAN side of the KX-HGW600.
This setting is not for the access control to the Setup Page or Recording/Playback page.
1. Click [Access Control] on the Camera Setup window.
2. Check None, Administrator Only or Restricted Access.
• When you check Administrator Only, the following window appears.
Enter the user name and password to access the Camera Portal page.
3. When you have finished, click [Save]. The setting will be saved.
4. Click [Restart Now!].
When you check Administrator Only, the authentication window appears. Enter
the registered user name and password and click [OK].