18 Use the camera on a wireless LAN
[Wireless] (SW174W only)
Wireless network settings for connecting the camera to a wireless router or other wireless device can be
configured on the “Wireless” page.
The “Wireless” page has 2 tabs; the [Basic] tab and the [Status] tab.
Complete the network settings with a wired connection using a LAN cable before performing wireless settings.
(®page 166)
If the wireless router supports automatic settings using WPS, perform settings automatically. (®page 206)
If the wireless router does not support automatic settings using WPS, perform settings manually.
(®page 202)
The camera's “Wireless QoS” function can be used. (®page 210)
After completing the camera's wireless settings, information such as the wireless connection status and
wireless information can be checked. (®page 210)
18.1 Manually connecting the camera to a wireless
LAN (manual settings) [Basic]
Click the [Basic] tab on the “Wireless” page. (®page 47, page 49)
202 Operating Instructions
18 Use the camera on a wireless LAN [Wireless] (SW174W only)
