C2635M (1/07) 17
CONFIGURING A SINGLE RAID LEVEL 5 ARRAY
To configure a single RAID Level 5 array:
1. Power up the DX9200HDDI. For information about powering up the DX9200HDDI, refer to the DX9200HDDI Series IDE Video Storage Unit
installation/operation manual.
2. On the DX9200HDDI control panel, do the following:
a. Press the CTRL button. The TO CONTROLLER PRESS ANY KEY message is displayed on the LCD screen.
b. Press !. The Enter Password prompt is displayed.
c. Press
! to enter 00000000 (default password).
d. Press
!. The Main menu is displayed.
Figure 13. Accessing the Main Menu
3. To configure a single array, do the following:
a. Press
!" and scroll to 2 RAID Params.
b. Press
!. The 2 RAID Params menu is displayed.
c. Press
!" to scroll to 21 Array 1.
d. Press
!. The 21 Array 1 menu is displayed.
e. Press
!" and scroll to 211 Re-Conf RAID.
f. Press
!. The 211 Re-Conf RAID menu is displayed.
g. Press
!" to scroll to YES.
