C2635M (1/07) 35
Connecting the DX8100 to the DX9200HDDI
The DX9200HDDI can support one or two DX8100 DVRs (refer to Figure 20 and Figure 21). The optional DX8100-ISCI SCSI card must be installed
prior to connecting the DX8100s to the DX9200HDDI. For information about installing the DX8100-ISCI SCSI card, refer to Installing the DX8100-
ISCI SCSI Card on page 9.
To connect a DX8100 to the DX9200HDDI:
1. Power down the DX9200HDDI unit.
2. Power down the DX8100 DVR.
3. If the DX9200HDDI and DX8100 are to be rack mounted, perform the physical installation procedures as specified in the respective
installation manual for each unit.
4. Connect either one or two DX8100 DVRs to a single DX9200HDDI with a standard 50- to 68-pin SCSI cable.
Figure 20. Single DX8100 to DX9200HDDI SCSI Connection
Figure 21. Dual DX8100 to DX9200HDDI SCSI Connection
5. Power up the DX9200HDDI, and then power up the DX8100.
6. To complete the installation process, set up the DX8100 to recognize the DX9200HDDI. For information about setting up the DX8100 to
recognize the DX9200HDDI external storage device, refer to Configuring the DX8100 to Access the DX9200HDDI on page 36.
DX9200HDDI
DX8100
IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9 IN10 IN11 IN12 IN13 IN14 IN15 IN16
OUT16OUT15OUT14OUT13OUT12OUT11OUT10OUT9OUT8OUT7OUT6OUT5OUT4OUT3OUT2OUT1
ALARMINPUTS RELAYOUTPUTS
12245678GND
9 10111213141516
12245678GND
9 10111213141516
SCSI
DX9200HDDI
DX8100
IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9 IN10 IN11 IN12 IN13 IN14 IN15 IN16
OUT16OUT15OUT14OUT13OUT12OUT11OUT10OUT9OUT8OUT7OUT6OUT5OUT4OUT3OUT2OUT1
ALARMINPUTS RELAYOUTPUTS
12245678GND
9 10111213141516
12245678GND
9 10111213141516
DX8100
IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9 IN10 IN11 IN12 IN13 IN14 IN15 IN16
OUT16OUT15OUT14OUT13OUT12OUT11OUT10OUT9OUT8OUT7OUT6OUT5OUT4OUT3OUT2OUT1
ALARMINPUTS RELAYOUTPUTS
12245678GND
9 10111213141516
12245678GND
9 10111213141516
SCSI
SCSI
