8 C2635M (1/07)
TOOLS NEEDED
OTHER DX8100 OPTIONAL ACCESSORIES
The DX8108 base unit comes with an 8-channel Capture Card and the DX8116 base unit includes a 16-channel Capture Card.
The DX8100-ISCI option is not supported for the DX8124 or DX8132 models. These models use two Capture Cards that are installed in PCI slots 2
and 3. In this case, no available slots remain to install the DX8100-ISCI option, which includes a DX8100-ISCI SCSI card that is installed in slot 2.
The table below describes other DX8100 optional accessories that can be installed with the DX8100-ISCI option. For a list of the current DX8100
options, refer to the DX8100 Product Specification Sheet. If an option is not listed in Table C, the option is not supported in combination with the
options described in this manual.
Table B. Required Tools
Qty Description
1 Phillips screwdriver #1 (nonmagnetic)
1 Properly grounded electrostatic discharge (ESD) wrist strap and mat
4 Small containers for storing screws (optional)
Table C. DX8100 Optional Accessories
Option Number Description
DX8108-AUD The DX8100 8-channel audio input card audio card is installed on a 16-channel Capture
Card. In this case, only audio inputs 1 to 8 are available for recording. Audio channels 9 to
16 can be configured, but audio data is not recorded.
DX8116-AUD The DX8100 16-channel audio input card audio card cannot be installed on an 8-channel
Capture Card.
DX8100-512RAM DX8100 memory upgrade from 512 MB to 1 GB.
DX9200HDDI External RAID storage expansion unit. This option is not available with DX8124 or
DX8132 models.
KBD300A KBD300A universal keyboard (requires KBDKIT).
KBDKIT (-X) Remote keyboard wiring kit (X = 220 VAC).
VSI-PRO AVE video serial interfaces for ATM/POS. The VSI-PRO and required cabling is available
from AVE.
