Emergency repairs
– 91 –
EMERGENCY REPAIRS
Vehicle Tool Kit
All vehicles are equipped with an exten-
sion handle for tilting the cab. It is
secured within the passenger’s
seat
stowage compartment (twin seat) or,
alternatively, secured behind the pas-
senger’s seat (single seat).
Replacing The Drive Belt
IMPORTANT: Always install
the correct replacement drive
belt.
Refer to the engine manufacturer’s
Operation and Maintenance Manual.
Drive belt tension
All engines are equipped with an auto-
matic drive belt tensioner and, there-
fore, cannot be manually adjusted. In
the event of incorrect drive belt tension,
consult your dealer at the earliest
opportunity.
Replacing The Compressor
Belt
(A/C and Compressor is optional)
IMPORTANT: Always install
the correct replacement drive
belt.
1. Disconnect the batteries, nega-
tive terminal first, then positive
terminal
.
2. Fully tilt the cab.
3. Loosen the adjusting screw
retainer bolt (1), but do not
remove.
4. Loosen the jam nut (3).
5. Loosen the tensioning bolt (4).
6. Pivot the compressor to slacken
the belt.
7. Remove the compressor belt (5).
1
2
3
4
5
PB1340A.book Page 91 Friday, September 1, 2000 7:40 AM
