Black plate (26,1)
<YRD5055-A/U>26
# When the rearoutput setting is R-SP:S/W,
you cannnot selectF.I.E. function.
2 Press a to turn F.I.E. on.
# Toturn F.I.E. off,press b.
3 Press c or d to select a desired fre-
quency.
Each press of c or d selects frequency in the
following order:
100160250 (Hz)
Notes
! After turning theF.I.E. functionon, use thebal-
ance adjustment (referto page 22) andadjust
front and rearspeaker volumelevels until they
are balanced.
! Turnthe F.I.E. functionoff when using a 2-
speaker system.
Boosting the bass
Bass boost function boosts the bass level of
sound lower than 100 Hz. The more the bass
level is increased, the more the bass sound is
emphasized and the entire sound becomes
powerful. When using this function with the
subwoofer,the sound under the cut-off fre-
quency is boosted.
1 Press AUDIO to select BASS.
Press AUDIO until BASS appears in the dis-
play.
# You canalso select the bassboost setting by
pressing and holdingSW.
2 Press a or b to select a desired level.
0 6 is displayed as the level is increased or
decreased.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select SLA.
Press AUDIO until SLA appears in the display.
3 Press a or b to adjust the source vo-
lume.
Each press of a or b increases or decreases
the source volume.
SLA: +4 SLA: 4 is displayed as the source
volume is increased or decreased.
Note
The AM tuner volumelevel can also be adjusted
with source leveladjustments.
Audio Adjustments
En
26
Section
07
