A SERVICE OF

logo

Open as PDF
next previous
DAILY OPERATION
31
Bottom of form at tear bar
If your form is positioned as shown, you may skip the next section on
positioning and proceed with “Tearing off a Form” on the next page.
Positioning the Form for Tear Off
1. If your print job has completed and the form is not positioned as
shown above, take the printer off line by pressing the ONLINE button.
2. Press the FORM FEED button. This will automatically position the
form at the tear bar and you may tear off the form as described next.
Tearing off a Form
1. Make sure the printer is off line by pressing the ONLINE button if
necessary. This will prevent the printer from pulling the paper down
to start printing the next job while you are tearing off this one.
2. Pull the paper toward the front of the printer and toward one side of
the printer as shown.