DAILY OPERATION
37
MOVE
Down/Up
PRINT 0.00”
×
The VALUE buttons will move the print down or up in 1/100
th
inch
increments. Note again that the arrow will change according to the
direction the print is to be moved from the normal print position. The
maximum distance print may be moved is 9.99 inches in either direction.
Example
In this example, a number needs to be printed in a box on a preprinted
form. This form could be a packing list, an invoice, or a check. The first
time the page is printed, the number misses the box as shown below.
12345
In this case, the print needs to be moved to the right and down. To
accomplish this, press either of the ALIGN buttons and access the
Left/Right option. First move the print to the right using the VALUE
buttons. It appears that the text needs to move about three characters. If
the text were being printed at 10 cpi (characters per inch), this would be
0.30 inches. After making this adjustment the display would look as
follows.
MOVE
Left/Right
PRINT
0.30”→
If you were to print this form now, it would appear as follows, showing that
the print still needs to be moved down.
12345
To move the print down, access the Down/Up option by pressing either of
the ALIGN buttons. It appears that the print needs to be moved down
nearly the height of the characters. These characters are approximately
0.10 inches tall, so move the print down about 0.08 inches. The display
should look as follows.
