Loading and Unloading Your Combination Rifle/Shotgun (cont’d)
3(cont’d). If the locking lever does not move to the fully locked position (See Picture 26) break open action
again and check to see if the shot shell and cartridge are fully seated in the chambers. If the shell
and cartridge are fully seated then re-close the action. If the shell and cartridge are not fully
seated, check the chambers for blockage and check the shell and cartridge for deformation and
retry closing the action once more. If the shell and cartridge are the correct type and the chambers
are not deformed and the top lever does not move to its fully locked position, unload the gun
(follow Unloading Instructions) and have a competent gunsmith look at the gun or return the gun
to Remington I.S.P. for inspection. Do not force the combination rifle/shotgun closed.
TO UNLOAD:
1. Break open the combination rifle/shotgun by pushing
the top lever of the receiver all the way to the right
and tipping the barrels down. (See
Picture 27).
2. Remove the shell and cartridge from the chambers by
grabbing them by the rim of the shell and
cartridge and pulling them from the chambers.
(See
Picture 28).
3.
V
isually check the barrels to make sure that they are
free from obstructions. (See
Picture 29).
13
Picture 27
Picture 28
Picture 29
Picture 26
