2322
Additional Information On Screw Choke Tubes: (cont’d)
D. Correctly installed choke tubes: Lead shot choke tubes should fit flush or slightly below the muzzle end of
the barrel. Steel shot choke tubes will protrude out from the barrel about
3
/
4
” and the mating lip will be flush
with barrel end.
E. Before using the combination rifle/shotgun make sure that the choke tubes are installed correctly.
F. Keep choke tubes lubricated and installed. Never fire the gun without a choke tube installed. Handle choke
tubes carefully since the leading edge is very thin.
Notes on Shot Material and Chokes:
1. Shells using Bismuth® or Tungsten-Matrix® shot are subject to the same barrel and choke tube limitations
as lead shot. Shells using Tungsten-Iron shot or Hevi-Shot® are subject to the same barrel and choke tube
limitations as steel shot.
2. On fixed choke guns, shells loaded with steel, Tungsten-Iron or Hevi-Shot® should be fired only in
IC or Cylinder barrels. DO NOT fire steel, Tungsten-Iron or Hevi-Shot® shells in fixed barrels with
Modified, Improved Modified or Full choke barrels. Lead, Bismuth® and Tungsten-Matrix® may be fired
in all fixed choke barrels.
3. On fixed choke guns, slugs may be fired in only IC and Cylinder barrels. DO NOT fire slugs in fixed choke
barrels with Modified, Improved Modified or Full chokes.
If you would like to buy extra choke tubes (skeet, trap, extra full, etc.) call (321)-639-1432.
