Remington's SPR 94 Manual

A SERVICE OF

next previous

5

Use the Security Lock Provided with your Combination Rifle/Shotgun

This combination rifle/shotgun comes with a security lock to assist in protecting against unauthorized use.

(See

Picture 1). The combination rifle/shotgun must be unloaded when the security lock is in place on the

combination rifle/shotgun.

WARNING

Using the security lock cannot substitute for securing your firearm and ammunition in separate, locked locations.

The security lock operates as follows:

1. To open the Trigger Lock put the Key into the notches of the Trigger Lock Nut and un-screw it

counter-clockwise (See

Pictures 2 and 3). Remove the Trigger Lock Screw.

2. To install the Trigger Lock on a Combination rifle/shotgun put the Trigger Lock over the trigger guard with

the larger end of the Trigger Lock shroud pointing toward the muzzle. Then place the Trigger Lock Screw

through the cross-slotted hole on the side of the Trigger Lock Shroud. (See

Pictures 4 and 5).

Picture 1

Picture 2 Picture 3

Picture 4 Picture 5