A SERVICE OF

logo

1.19
Setting Up Your Product
Setting Power Save Mode
Your product reduces power consumption when it is not in actual
use. The Power Save mode setting determines the length of time
the machine waits after a job is printed before it switches to a
reduced power state.
1
Press Setup on the operation panel. The display shows the
first menu; LANGUAGE.
2
Press the Scroll buttons ( or ) until you see “POWER
SAVE MODE” in the display and then press Enter.
3
The display shows the time available. Press the Scroll buttons
( or ) until you see the desired time in the display. The
current setting is tagged with a at the end of the display.
4
Press Enter to save the selection.