3.2
Copying
Setting Paper Size and Type
First make sure you have paper loaded, following the instructions
in “Loading Paper” on page 1.10. Then you have to set the paper
size and type using the operation panel buttons.
N
OTE
:
These settings are applied to the stand-alone copy mode only.
In PC printing mode, you have to select the paper type and size in the
application program you use.
Paper Size
After loading paper, take the following steps to set the paper size
from the operation panel:
1
Press Setup on the operation panel. The display shows the
first menu: “LANGUAGE”.
2
Press the Scroll buttons ( or ) until you see “PAPER
SIZE” in the display.
3
Press
Enter
. The current setting is tagged with a at the end
of the display.
4
Press the Scroll buttons ( or ) until you see the paper
size you are using in the display.
5
Press Enter to save the selection.
N
OTE
:
When you use legal-size paper, do not pull out the paper
output tray. If you do, a paper jam may occur.
