6.4
Maintenance
Printing a Cleaning Page from the Product
1
Press Setup on the operation panel.
2
Press the Scroll buttons ( or ) until you see
“MAINTENANCE” on the display.
3
Press Enter. “CLEAN CARTRIDGE” appears in the display.
4
Press Enter to start the cleaning process. Your product prints
a cartridge clean page.
5
Examine the cleaning pattern. Compare the diagonal lines at
the top and bottom of the test pattern.
A broken line shows any clogged nozzles. If the bottom line
shows improvement, rerun this cleaning process two more
times.
If this process does not improve the print quality, your print
cartridges may be low in ink. Replace the print cartridge, if
necessary.
6
If the line is still broken, clean the print nozzles. See
“Cleaning Print Cartridge Nozzles” on page 6.6.
Before purge
Purge process
After purge
