A SERVICE OF

logo

3780Link for Windows
14
corresponds to the order in which they were configured. If omitted, Dcpload
loads all boards found.
-f name Path/File to download
The -f switch specifies the full path name of “amxbsc.exe” if it is not in the
currently logged subdirectory. For example:
dcpload -f \other_dir\amxbsc.exe
DCPPEEK SmartSync/DCP BSC Process Status Utility
This program is used to “peek” at each SmartSync/DCP and verify that the
various processes running in the co-processor are active. This utility is
intended primarily for trouble-shooting purposes, but can be run at any time
to check the status of BSC processes.
The following is an example of output from Dcppeek after running Dcpload
with a single 4-port SmartSync/DCP: