When you connect both VHF and UHF antennas
Use the optional EAC-66 U/V mixer.
1 the VHF antenna end using the
appropriate connector.
Connect the cables to the mixer.
3 Plug the mixer to VHFIUHF.
UHF VHF
When you connect a cable with a special
converterldecoder* for pay cable TV systems
Pay cable "IV systems use scrambled or encoded
signals and require special converters (decoders) in
addition to the normal cable connection.
: Signal flow
AU×
Converter/
CONVERTER coaxial cable
CATV
VHFIUHF
cable
When you connect bothVHFIUHF antennasand a
CATV cable
_'_}" CATV
AUX
cable
TO
CONVERTER
VHFIUHF VHFIUHF
antenna cable
Note
In this case, do not connect anything to the TO
CONVERTER terminal.
When the UIV mixer is used
Snow and noise may appear in the pictures of the cable TV
channels over 37 (W + 1).
* The special converterldecoder will be supplied by the cable
system operator,
11
