Remote sensor
r- oE3-
-1
1
Press POWER on the TV or the Remote
Commander to turn the TV on.
POWER
Press CABLE so that the
appropriate mode appears.
CABLE
%
l c31
To preset VHF or UHF To preset cable TV
channels channels
Press ANTIAUX according to channel preset.
the to he
ANT/AUX 3 31
_-_ To preset pay cable
TV channels
To preset VHF, UHF
or regular cable
13/channels
4
AUTO
PGM
Press AUTO PGM.
"AUTO PROGRAM" is displayed on the screen and receivable
channels (other than the channels already preset) will be
preset in numerical sequence. The channels previously preset
remain in the unit's memory.
When no more channels can be found, the programming stops
and the lowest numbered channel is displayed.
Receivable channels of this TV are:
VHF: 2-13
UHF: 14-69
Cable: 1-125
To add the channels that could not be preset with automatic
programming because their signal strength was too weak, or
to erase unnecessary channels.
Follow the steps in "To preset only the desired channels or to
erase unnecessary channels" on the next page.
To check preset channels
Press CH +1-.
If the indication "VIDEO 1, VIDEO 2, VIDEO 3" is displayed on
the screen
Press the TV/VIDEO button on the TV. or the TV button on the
Remote Commander so that a channel number appears.
16
